Corner Units
Corner Units
Rolla regularly supply corner units as part of a Motor Control Centre or Switchboard. They are aften used to limit the length of the board and make maximum use of the available space.
The main busbars
The main busbars, earth bar and all control wiring must be directed around the corner (usually 90 degrees). As standard our main earth bar is located in the top front chamber for easy access, along with any control wiring.
MCC
Sometimes two corners are used to allow an MCC to fit into a very confined space. Although most corners are “inside”, with the front of the MCC facing inwards, we also supply outside corners where appropriate.
Often only the main bars are required around a corner so can also supply a top-box only version as shown above.
In some cases the space within the corner can be utilised for equipment such as power factor correction etc.
Corner units contain an offset to one side to ensure adjacent doors can be opened without clashing.
After the short circuit test, the continuity is checked and an impulse test carried out.
Stay Updated with our Latest News
Why low-voltage assemblies must comply with BS EN 61439
This recent article published by BEAMA in the Panel Building & System Integration (PBSI) magazine is an interesting read:- PBSI It acts as an important reminder to all of us
Review of 2020
Over the last 12 months Rolla has continued to manufacture and deliver hundreds of projects for the water industry, one of those essential services that we rely on every day.
Major UK water infrastructure project
Rolla is proud to have been involved with a major UK water infrastructure project, the largest ever undertaken by one of the UKs largest water companies and currently nearing completion.
